ElectricValve Actuators
HANBAY Toll Free 800 315 4461
use this button to contact us:

Français


Deutsch

   Phone 514 426 1989
Fax 514 426 9834
e-mail: secureinfo@hanbayinc.com
Hanbay Inc © 2007
Friendly
Service

Fast
Deliveries

Attractive
Pricing

Call for
Specials
1 800 315 4461
1 514 426 1989
Products Valve Choice Company Info User Manuals Brochures Ordering
MPA02/05 Multiturn Speed Torque Relationship
        
MPA02 > 4..20mA Control         MPA05 > RS485 Serial Control
MPA02 / MPA05   are multi turn / high speed models
Time for 1 turn Temps par rev. Zeit per Rev.
Min. Voltage
Alimentation min.
Min. Spannung
Torque at end speed
Torque après démarrage
Drehmoment nach Anlauf
Torque at pullout
Torque au démarrage
Drehmoment bei Anlauf
6.7 sec
12 VDC @ 1.0 A
8.0 in-lbs
0.9 Nm
11.7 in-lbs
1.3 Nm
4.3 sec
12 VDC @ 0.7 A
5.3 in-lbs
0.6 Nm
11.7 in-lbs
1.3 Nm
6.7 sec
16 VDC @ 1.5 A
12.3 in-lbs
1.4 Nm
14.3 in-lbs
1.6 Nm
3.3 sec
16 VDC @ 0.8 A
8.0 in-lbs
0.9 Nm
14.3 in-lbs
1.6 Nm
4.0 sec
24 VDC @ 1.3 A
11.3 in-lbs
1.3 Nm
14.3 in-lbs
1.6 Nm
6.3 sec
12 VAC @ 1.5 A
8.3 in-lbs
0.9 Nm
8.3 in-lbs
0.9 Nm
6.7 sec
16 VAC @ 2.2 A
12.3 in-lbs
1.4 Nm
13.3 in-lbs
1.5 Nm
3.3 sec
16 VAC @ 1.5 A
7.7 in-lbs
0.9 Nm
13.3 in-lbs
1.5 Nm
3.3 sec
24 VAC @ 2.1 A
11.0 in-lbs
1.2 Nm
14.3 in-lbs
1.6 Nm

 

SELECT any torque of operation (dip switch settings on board) and, depending on your supply voltage, you get the speed as per the table above.

The unit will operate reliably with any supply voltage between 12 and 24 Volts   AC or DC